Polystick MX is a self-adhered high-temp waterproofing underlayment for metal roof coverings and various other applications. Utilizing ADESO® dual-compound self-adhered technology, Polystick MX features a polymer modified bitumen upper compound and a proprietary self-adhesive SBS (elastomeric) compound on the bottom. A split release film that protects the self-adhesive compound allows for easy application.
Polystick MX features a cavitated slip-resistant top film surface which can be exposed up to 90 days. With a temperature resistance of up to 250°F, Polystick MX is ideally suited for high-temperature roof covering systems such as steel and aluminum panels.
Typical Applications
• Specifically designed as underlayment for high-temperature applications under metal
• Suitable for application under asphalt shingles and other approved roof coverings
• Over entire roof and/or for valleys, skylights and other critical areas
Features and Benefits
• ADESO dual-compound self-adhered technology
• Cavitated slip-resistant film surface with up to 90 days exposure
• Fiberglass reinforced for added strength and dimensional stability.
• Self-adhered technology increases labor efficiency and roof dry-in speed
• Asphaltic compound provides excellent sealability around nails
• Approved up to 250°F
Polyanchor XFR is a fire-rated dual purpose ember and water resistant underlayment. Polyanchor XFR features a plastomeric modified bitumen upper compound and a self-sealing modified compound on the bottom. Polyglass’ patented Burn-Shield Technology®
provides superior ember resistance. Polyanchor XFR features a slip-resistant embedded mineral aggregate walking surface which contributes to the overall ember resistance of the membrane. Polyanchor XFR is ideally suited for mechanically attaching under clay/concrete tile roof covering systems where ember resistance is required or desired.
Typical Applications
• Full roof coverage on combustible decks and under Class A roof coverings to protect against burning embers
• As a water-resistant barrier on steep slope roofing under concrete, clay, and slate tiles as well as shingles and shakes
• Areas prone to wild fires as required by building code
Features and Benefits
• Patented Burn-Shield Technology provides superior ember resistance
• Meets CA code requirements – Class A Fire Rated ember resistant underlayment for WUI
(Wildland Urban Interface)*
• Fiberglass mat provides increased strength and fire resistance
• Mineral aggregate surface engineered for superior slip resistance
• Tough plastomeric modified asphalt top compound for tile stacking
• Up to 180 day exposure
• Self-sealing modified compound on the bottom
Polyanchor HV is a nailable anchor sheet specially designed for the temporary protection of steep-slope roofs in areas prone to high winds. Designed with Duofix® Technology, Polyanchor HV uses a strong bituminous bonding surface combined with a special tear resistant fiberglass mat to provide superior wind uplift resistance. The top surface of Polyanchor HV is formulated to provide an ideal bonding surface for Polystick polymer modified self-adhered underlayments. The bituminous compounds in the sheet enhances sealability around fasteners and moisture protection while the heavy-duty mat provides strength and tear resistance around fasteners and plates. Polyanchor HV is ideally suited for use with clay/concrete tile roof covering systems with Polystick TU Plus or TU Max as the final substrate for the roof covering. Polyanchor HV is also suitable for use under asphalt shingles.
Typical Applications
• Nailable anchor sheet over approved steep-slope wood decks for temporary
waterproofing protection
• Base sheet for Polystick tile underlayments for concrete, clay, and slate tiles roof
covering systems
• Water-resistant barrier on steep slope roofing under asphalt shingles and shakes
Features and Benefits
• Duofix® Technology provides superior wind uplift resistance.
• Top surface specially designed to provide highly bondable surface for Polystick
underlayments
• Surface engineered for walkability on sloped roofs
• High tensile-tear strength mat provides increased fastener and plate tear through resistance
• Nail sealing modified asphalt compound
PG 800W is an asphalt-based, clay emulsion product that can be used as a protective roof coating. It can be used over smooth surfaced asphalt built-up, modified bitumen membranes. Also, for use as a base coat for reflective elastomeric coatings. PG 800W can be used as a surface protectant or waterproofing when used in conjunction with polyester reinforcement.
When applied as a roof protectant PG 800W’s unique formulation allows the film to “breathe” while drying and is waterproof upon curing.
Polyglass LS MAX is a self-adhered waterproofing membrane with a polyester reinforced surface fabric compatible with a liquid applied membrane system. Utilizing ADESO® dual compound self-adhered technology, Polyglass LS MAX features a polymer modified bitumen upper compound and a proprietary self-adhesive SBS (elastomeric) compound on the bottom. A split release film that protects the self-adhesive compound allows for easy application.
The polyester reinforced surface of LS MAX allows the Polyglass liquid applied base coat to flow through it, bonding with the modified bitumen membrane while reinforcing the liquid membrane system. Additional top coats complete the Stick n’ Coat system providing an impermeable monolithic system which can also be highly reflective when white reflective coatings are utilized.
Polyglass LS MAX is a flexible membrane allowing it to lay flat with ease, increasing install speed. This product features patented SEALLap® factory applied adhesive treatment at the membrane overlap which provides a quick watertight bond.
As part of the Stick ‘N’ Coat System, Polyglass LS MAX can be installed as a single membrane or as part of a multi-ply system when used over Elastobase V, Elastobase SA, or Elastoflex SA V and coated with PolyBrite® 71 Base Coat and PolyBrite® Climate Series.
Polyvap SA G is a self-adhered vapor retarder for use in commercial low-slope roofing applications. Utilizing ADESO® dual-compound self-adhered technology, Polyvap SA G features a polymer modified bitumen upper compound and a proprietary self-adhesive SBS (elastomeric) compound on the bottom. A split release film that protects the self-adhesive compound allows for easy application.
Polyvap SA G is reinforced with a fiberglass mat, and surfaced with aggregate to enhance skid resistance and allow exposure up to 90 days. The rubberized asphalt seals around correctly installed nails on the weathering surface.