Polystick MX is a self-adhered high-temp waterproofing underlayment for metal roof coverings and various other applications. Utilizing ADESO® dual-compound self-adhered technology, Polystick MX features a polymer modified bitumen upper compound and a proprietary self-adhesive SBS (elastomeric) compound on the bottom. A split release film that protects the self-adhesive compound allows for easy application.
Polystick MX features a cavitated slip-resistant top film surface which can be exposed up to 90 days. With a temperature resistance of up to 250°F, Polystick MX is ideally suited for high-temperature roof covering systems such as steel and aluminum panels.
Typical Applications
• Specifically designed as underlayment for high-temperature applications under metal
• Suitable for application under asphalt shingles and other approved roof coverings
• Over entire roof and/or for valleys, skylights and other critical areas
Features and Benefits
• ADESO dual-compound self-adhered technology
• Cavitated slip-resistant film surface with up to 90 days exposure
• Fiberglass reinforced for added strength and dimensional stability.
• Self-adhered technology increases labor efficiency and roof dry-in speed
• Asphaltic compound provides excellent sealability around nails
• Approved up to 250°F
Polyanchor HV is a nailable anchor sheet specially designed for the temporary protection of steep-slope roofs in areas prone to high winds. Designed with Duofix® Technology, Polyanchor HV uses a strong bituminous bonding surface combined with a special tear resistant fiberglass mat to provide superior wind uplift resistance. The top surface of Polyanchor HV is formulated to provide an ideal bonding surface for Polystick polymer modified self-adhered underlayments. The bituminous compounds in the sheet enhances sealability around fasteners and moisture protection while the heavy-duty mat provides strength and tear resistance around fasteners and plates. Polyanchor HV is ideally suited for use with clay/concrete tile roof covering systems with Polystick TU Plus or TU Max as the final substrate for the roof covering. Polyanchor HV is also suitable for use under asphalt shingles.
Typical Applications
• Nailable anchor sheet over approved steep-slope wood decks for temporary
waterproofing protection
• Base sheet for Polystick tile underlayments for concrete, clay, and slate tiles roof
covering systems
• Water-resistant barrier on steep slope roofing under asphalt shingles and shakes
Features and Benefits
• Duofix® Technology provides superior wind uplift resistance.
• Top surface specially designed to provide highly bondable surface for Polystick
underlayments
• Surface engineered for walkability on sloped roofs
• High tensile-tear strength mat provides increased fastener and plate tear through resistance
• Nail sealing modified asphalt compound
Polyglass PMMA High Traffic Textured (HTT) Surface Finish is a high performance, rapid-curing, flexible, methacrylate resin with a pre-mixed aggregate, designed for pedestrian and/or vehicular traffic. It can be applied as a non-reinforced liquid applied surfacing material or as the trafficable surface coat over a reinforced PMMA Waterproofing System.
Polyglass LRF CR is a low rise, two-component spray polyurethane foam adhesive designed to adhere insulation boards and cover boards to a multitude of substrates and roof decks. Polyglass LRF CR is a ready to dispense kit consisting of A and B cylinders, a hand held dispensing unit and temperature warning nozzles. This disposable system is self-contained and eliminates the need for other specialized equipment.
Additional individual accessories are available for the Polyglass LRF CR application. These accessories include Mixing Nozzle Extender, 25’ Hose and Applicator Assembly, Colorwise Long Cone Nozzles in a 10 pack and 25 pack.
SINGLE-COMPONENT, FAST-CURING, MONOLITHIC WATERPROOFING MEMBRANE THAT CAN BE APPLIED TO DAMP AND GREEN CONCRETE
Mapeseal GC is a fast-curing, 100%-solids, cold-fluid-applied, single-component, moisture-curing, structural waterproofing membrane that will not shrink and is VOC compliant in virtually all municipalities. Very low in odor, it is well suited for use in and around occupied spaces. Thanks to advanced proprietary technology, this single grade membrane can be used on both vertical and horizontal surfaces, as well as, for green concrete applications.
For critical applications, the system can be reinforced with Mapeseal Fabric. Mapeseal GC can be applied by roller, brush, trowel, or squeegee.
Features and Benefits
- Single-grade membrane for vertical and horizontal applications
- Suitable for green concrete
- Can be applied in a variety of thicknesses, or with reinforcement, making it customizable to any job
- Seamless and monolithic
- Does not require a primer
- Applies easily with no mixing or special equipment required
- Free of solvents
- Very low odor
- Free of tar and asphalt
- Compatible with common construction materials such as concrete, concrete masonry units (CMUs), stone, metal, plastic (PVC and ABS), exterior grade plywood and insulating concrete forms (ICF)
Elastoflex SA Base membrane is a self-adhered, elastomeric base ply low-slope roofing product. Elastoflex SA Base is manufactured using patented ADESO® dual-compound self-adhered technology, whereby a “true” Styrene-Butadiene-Styrene (SBS) modified asphalt compound is applied on the top layer and a proprietary self-adhesive SBS compound is applied to the bottom. Elastoflex SA Base membrane is built with a strong non-woven polyester mat to enhance tear strength and puncture resistance, providing a robust membrane that resists natural forces and other factors on the rooftop.
Elastoflex SA Base membrane is finished with a film with pre-printed laylines on the top surface and a split release film on the bottom surface.
Elastoflex SA Base can be used as part of a Polyglass warranted multi-ply system with Elastoflex SA P or other approved Polyglass cap sheet to provide cleaner application, improved application speed and removes the need for torches, hot asphalt or bonding adhesives on the job site.