PolyBrite QS is a premium grade water-based elastomeric coating engineered with quick set polymers which provide early-stage resistance to rain and heavy dew exposure. Formulated with advanced acrylic polymers, it creates a seamless, flexible membrane that resists cracking, peeling, and UV degradation while extending the useful life of the roof.
Its reflective properties help decrease roof surface temperatures, contributing to reduced energy costs, and its high tensile strength and elongation allow it to accommodate building movement.
PolyBrite QS also resists dirt pick-up, fungal and algal growth, and features a low VOC, non-flammable formulation for safer application.
Features and Benefits
• Rain resistant in as little as 25 minutes
• Extends the useful life of the roof
• UV resistant
• Decreases roof surface temperature, which can reduce energy costs
• Offers high tensile strength and elongation
• Resistant to dirt pick up and is fungal and algal resistant
• Low VOC and non-flammable
PG 800W is an asphalt-based, clay emulsion product that can be used as a protective roof coating. It can be used over smooth surfaced asphalt built-up, modified bitumen membranes. Also, for use as a base coat for reflective elastomeric coatings. PG 800W can be used as a surface protectant or waterproofing when used in conjunction with polyester reinforcement.
When applied as a roof protectant PG 800W’s unique formulation allows the film to “breathe” while drying and is waterproof upon curing.
Polyglass LS MAX is a self-adhered waterproofing membrane with a polyester reinforced surface fabric compatible with a liquid applied membrane system. Utilizing ADESO® dual compound self-adhered technology, Polyglass LS MAX features a polymer modified bitumen upper compound and a proprietary self-adhesive SBS (elastomeric) compound on the bottom. A split release film that protects the self-adhesive compound allows for easy application.
The polyester reinforced surface of LS MAX allows the Polyglass liquid applied base coat to flow through it, bonding with the modified bitumen membrane while reinforcing the liquid membrane system. Additional top coats complete the Stick n’ Coat system providing an impermeable monolithic system which can also be highly reflective when white reflective coatings are utilized.
Polyglass LS MAX is a flexible membrane allowing it to lay flat with ease, increasing install speed. This product features patented SEALLap® factory applied adhesive treatment at the membrane overlap which provides a quick watertight bond.
As part of the Stick ‘N’ Coat System, Polyglass LS MAX can be installed as a single membrane or as part of a multi-ply system when used over Elastobase V, Elastobase SA, or Elastoflex SA V and coated with PolyBrite® 71 Base Coat and PolyBrite® Climate Series.
PolyBrite 71 is a quality grade, water-based elastomeric base coat. This formulation uses 100% acrylic resins cures to form a seamless fluid applied roof membrane. As a base coat, it provides excellent bleed through resistance.
PolyBrite 71 provides protection from UV and other weather exposures.
PolyBrite 90.2 is a premium grade high solid, moisture cure, liquid applied silicone coating available in White or Kool Grey, which cures to form a seamless membrane when applied over the entire roof area. It also keeps the surface cool, providing protection from ultraviolet sun and other weather exposures.