Polyglass U.S.A., Inc. > FM

Product Certification: FM

Polyglass LRF – PG ECO

Product Description

Polyglass LRF-PG ECO is a two-component, low rise, solvent-free, polyurethane foamable adhesive. Application is quick & easy and adhesive sets in minutes resulting in significant labor savings for the contractor. Polyglass LRF-PG ECO is packaged in dual pressurized canisters and dispensed utilizing a disposable adhesive applicator assembly and 25′ hoses. Polyglass LRF-PG ECO does not contain HFC-134a or other high Global Warming Potential (GWP) propellants. This product is approved for use in all US markets that regulate ozone depleting substances.

Features and Benefits

  • Provides excellent wind-uplift resistance characteristic of adhered systems.
  • Applicator, hose, and all accessories needed are included with each canister set, ensuring thre is no extra equipment or additional steps needed.
  • Polyglass LRF-PG ECO eliminates potential for roof deck corrosion and disruption of building occupants due to fastening.
  • Fast application, quick adhesive set in period helping improve installation productivity for the
    contractor.
  • Using Polyglass LRF-PG ECO in lieu of mechanical fasteners eliminates thermal bridging and
    ensures maximum R-Value.
  • Contains no CFC or HCFC, high global warming potential propellants which ensures LRF-PG
    ECO meets all current national and state regulations.
  • Ultra low VOC content formula is approved for use in all OTC and SCAQMD regulated regions.

Polyglass Standard Roof Grip Drill Point Fastener

The Polyglass Standard RoofGrip® Drill Point Fastener (#12) is designed to secure insulation to steel (18 Ga.–24 Ga. [1.25–0.65 mm]) and wood. It is available in lengths from 1 5∕8″ to 8″ (40 to 200 mm). The Polyglass Standard RoofGrip Drill Point Fastener is Factory Mutual approved.

Features and Benefits

  • Heavier shank and thread diameters than most “standard” roofing fasteners.
  • Deep buttress thread for high pullout resistance.
  • Extra sharp drill point for quick installation in new or reroof applications.
  • Available with #3 Phillips truss head.

Polyglass Heavy Duty Fastener

The Polyglass Heavy Duty Roofing Fastener (#14) is designed to secure insulation to steel (1.25 to 0.75 mm), wood and structural concrete decks. Heavy Duty Fasteners can also be used to secure membrane to wood and concrete decks. The fastener is available in lengths from 1 ¼” – 24″ (30 to 610 mm), and is Factory Mutual approved.

Features and Benefits

  • Heavier shank and thread diameters for maximum strength.
  • Deep thread for high pullout resistance.
  • Extra sharp spade point for quick installation in new or reroof applications.
  • In concrete applications, fastener may be reversed out of predrilled hole without damaging the deck.

Polyglass Extra Heavy Duty Fastener

The Polyglass Extra Heavy Duty Roofing Fastener (#15) is a specialized, high-performance fastener designed to secure roofing materials to certain light gauge steel (20 Ga. [0.95
mm] and lighter), OSB and plywood roof decks. It is available in lengths from 2″ – 16″ (50 to 405 mm) and is Factory Mutual approved.

Features and Benefits

  • Oversized heavy shank and thread diameters for enhanced pullout resistance in light gauge steel roof decks.
  • Deep buttress threads further increase pullout and backout resistance.
  • Miniature drill point penetrates decks quickly and contributes to exceptional resistance to back-out as well as pullout.

Polyglass CD-10

The Polyglass CD-10 is a hammer-in, non-threaded fastener designed to secure insulation to structural concrete. This fastener is available in 2″ – 12″ (50 mm to 305 mm) lengths. The CD-10 is Factory Mutual approved.

Features and Benefits

  • Diamond point allows easier installation and less chance of hole damage.
  • Split bulb exerts pressure on walls of hole, producing remarkable holding power.
  • Strongest hammer-in fastener available.
  • Typical pullout values in cured concrete (3000 psi / 20 MPa) are over 800 lbs (363.2 kg).
  • A pullout test is recommended.
  • The Polyglass CD-10 is FM approved.

Polyglass 3″ Ribbed Galvalume® Plates

Polyglass Steel Plates are made of Galvalume® coated steel. The round design provides an even distribution of loads and eliminates sharp corners that can damage the insulation.

These plates are designed to be used with Polyglass fasteners to secure insulation.