Vertiwrap VPL and VPL LT air barrier membranes permit the passage of water vapor, while acting as a barrier to air and liquid water. Vertiwrap VPL and VPL LT reduce the build up
of moisture in the wall assembly, increasing the wall durability and comfort of the building occupants. Vertiwrap VPL and VPL LT are compliant in a wide variety of NFPA285 wall
assemblies.
- SWIFTSET Technololgy – rain ready in 30 minutes under ideal conditions*
- Vertiwrap VPL LT can be applied at 20°F (-6.7°C) and rising
- 12 months UV Exposure
- Single pass application
- 50 mils wet, 25 mils dry
- Designed to be sprayed, rolled, or trowel applied
- Monolithic membrane fully adheres to substrate virtually eliminating water migration
- Sheds water while allow vapor to pass
- Seals around fasteners used in brick ties, terminations bars, etc.
- NFPA 285 compliant in most wall assemblies
Polyglass Tecnotop S-3000 is a two-component polyaspartic top coat designed with mechanical resistance capabilities for heavy traffic applications.
Features and Benefits
- 5 kg in neutral
- Excellent durability
- Pot life: 30 mins
- Dry time 60 minutes
- Coverage @ 10 mils 148 ft2/kit
- Ideal for heavy traffic applications
- Roller, brush or spray application
Polyglass Tecnotop 2C is a two-polyurethane chemical resistant top coat designed with UV resistance capabilities ideal for vehicular and pedestrian traffic. Used as a protective layer for Tecnocoat systems, it is designed for permanently exposed applications ensuring weatherability performance.
Features and Benefits
- 20 kg
- White and Grey
- Ideal for vehicular/pedestrian traffic as well as chemical resistant applications
- Pot life: 60 minutes
- Dry time: 6 hours
- Coverage @ 7 mils 160 ft2/gal (700 ft2/kit)
- Roller, brush or spray application
Polyglass Tecnotop 1C is a one-component, aliphatic polyurethane wear coat and top coat. As a wear coat, Tecnotop 1C is loaded with aggregate to provide the system with excellent impact, abrasion, and chemical resistance. The top coat provides additional abrasion and chemical resistance and adds UV protection to the system.
Features and Benefits
- 20 kg, Grey
- Ideal for vertical upturns; Maintenance only traffic
- Initial dry time 8 minutes
- Recoat time 8 minutes–48 hours
- Roller, brush or spray application
Engineered for durability and integrity under mechanical stress, it offers exceptional chemical resistance and elasticity, even in extreme conditions. Its seamless and fully bonded, spray-on application ensures rapid curing, creating a monolithic membrane ideal for metal surfaces.
The elongation properties of Tecnocoat P-2049 EL, make it ideal for applications where structural movements require a stretchable product.
Features and Benefits
- 80 mils
- Tack free time 20 seconds
- Foot trafficable in minutes
- Easy to repair
- Highest elongation for use in metal applications
- Low VOCs
- System application 40oF and rising
- Coverage @ 80 mils WFT 20 ft2/gallon (2160 ft2/kit)
- Adheres to metal
- Can be used in exposed applications with approved Tecnocoat top coat
- Spray-applied
Engineered for durability and integrity under mechanical stress, it offers exceptional chemical resistance and elasticity, even in extreme conditions. Its seamless and fully bonded, sprayon application ensures rapid curing, creating a monolithic membrane ideal for a variety of surfaces and industries.
The aliphatic properties of Tecnocoat P-2049 AL, make it ideal for permanently exposed applications where resistance to UV is needed.
Features and Benefits
- 80 mils
- Tack free time 8 seconds
- Foot trafficable in minutes
- Easy to repair
- Low VOCs
- System application 40°F and rising
- Coverage @ 80 mils WFT 20 ft2/gallon (2160 ft2/kit)
- Adheres to a wide variety of substrates
- Spray-applied