PG 350 LV is a low-VOC (Volatile Organic Compound) adhesive specifically engineered to serve as a cold-applied bonding agent. It is designed for secure attachment of SBS (StyreneButadiene-Styrene) modified bitumen base sheets as well as SBS modified bitumen cap sheets, whether smooth or granulated, ensuring strong adhesion without the need for heat or open flames. As part of the PG adhesive product line, PG 350 LV is designed for markets that emphasize sustainability and lower environmental impact.
Features and Benefits
- Adheres to substrate and superior lap shear adhesion.
- Flexible with cohesive properties.
- Eliminates the need for kettles and torches.
- Excellent 24 hour strength; fully cured after 30 days.
- Non-destructive to asphalt based roofing membranes.
- Low odor and asbestos free.
Vertiwrap VPL and VPL LT air barrier membranes permit the passage of water vapor, while acting as a barrier to air and liquid water. Vertiwrap VPL and VPL LT reduce the build up
of moisture in the wall assembly, increasing the wall durability and comfort of the building occupants. Vertiwrap VPL and VPL LT are compliant in a wide variety of NFPA285 wall
assemblies.
- SWIFTSET Technololgy – rain ready in 30 minutes under ideal conditions*
- Vertiwrap VPL LT can be applied at 20°F (-6.7°C) and rising
- 12 months UV Exposure
- Single pass application
- 50 mils wet, 25 mils dry
- Designed to be sprayed, rolled, or trowel applied
- Monolithic membrane fully adheres to substrate virtually eliminating water migration
- Sheds water while allow vapor to pass
- Seals around fasteners used in brick ties, terminations bars, etc.
- NFPA 285 compliant in most wall assemblies
Polyglass Tecnotop S-3000 is a two-component polyaspartic top coat designed with mechanical resistance capabilities for heavy traffic applications.
Features and Benefits
- 5 kg in neutral
- Excellent durability
- Pot life: 30 mins
- Dry time 60 minutes
- Coverage @ 10 mils 148 ft2/kit
- Ideal for heavy traffic applications
- Roller, brush or spray application
Polyglass Tecnotop 2C is a two-polyurethane chemical resistant top coat designed with UV resistance capabilities ideal for vehicular and pedestrian traffic. Used as a protective layer for Tecnocoat systems, it is designed for permanently exposed applications ensuring weatherability performance.
Features and Benefits
- 20 kg
- White and Grey
- Ideal for vehicular/pedestrian traffic as well as chemical resistant applications
- Pot life: 60 minutes
- Dry time: 6 hours
- Coverage @ 7 mils 160 ft2/gal (700 ft2/kit)
- Roller, brush or spray application
Polyglass Tecnotop 1C is a one-component, aliphatic polyurethane wear coat and top coat. As a wear coat, Tecnotop 1C is loaded with aggregate to provide the system with excellent impact, abrasion, and chemical resistance. The top coat provides additional abrasion and chemical resistance and adds UV protection to the system.
Features and Benefits
- 20 kg, Grey
- Ideal for vertical upturns; Maintenance only traffic
- Initial dry time 8 minutes
- Recoat time 8 minutes–48 hours
- Roller, brush or spray application
Polyglass Primer PUc-1050 is a two-component, 100% solids polyurethane resin designed to increase adhesion between substrates and Tecnocoat membrane systems.
Features and Benefits
- 10 kg, 1:1 kit
- Pot life: 45 minutes
- Dry time 3 hours
- Coverage @ 7 mils 530 ft2/kit
- Roller, brush or spray application
- Above 40°F on concrete
- Can be installed at 32°F and rising