Polyglass Polystrip SA is a self-adhering waterproofing tape composed of a slip resistant surface and UV resistant film laminated to an aggressive elastomeric (SBS) modified asphalt adhesive. The adhesive is protected by a siliconized release paper which allows quick and accurate installation.
Polystrip SA seals the roof deck seams and other construction details in compliance with project and/or building code requirements where a self-adhesive strip meeting ASTM D1970 standards is designated.
Polystrip SA may be covered with any Polystick or Polyanchor roofing underlayment or roofing felt. Polystrip SA can also be used as a general flashing membrane.
Typical Applications
- Designed for applications on new or re-roof projects over roof deck joints
- May be covered with Polyglass Polystick or Polyanchor underlayments
- Can also be used as a general flashing membrane
- Adhesion to plywood, OSB, metal and other approved substrates
Features and Benefits
- “Seal the deck” joints from water intrusion.
- Slip resistant walking surface.
- Highly flexible and lay flat characteristics; transitions over uneven joints.
- Asphaltic rubberized compound provides excellent sealability around nails.
- Approved up to 250°F
- Up to 60 days UV exposure.
Polystrip SA – Roof Deck Joint Tape Take-Off Calculator
Designed to help roofing professionals estimate how many rolls of Polystrip SA joint tape are needed based on the square footage of a roof. Estimates are based on standard measurements for plywood and joint spacing to calculate the total linear footage of deck joints and provide an accurate roll count.
Product Packaging & Dimensions – Polystrip SA
| 4″ Wide |
4″ (10.2 cm) |
67′ (20.4 m) |
12 |
804′ (245 m) |
| 6″ Wide |
6″ (15.2 cm) |
67′ (20.4 m) |
8 |
536′ (163 m) |
Modifleece is a fleece-backed Styrene-Butadiene-Styrene (SBS) modified bitumen roofing membrane base sheet for use in multi-ply low-slope roofing systems. Utilizing a unique laminating process, a specially formulated dual compound is integrated into the polyester fabric to create a monolithic bond between the two components. The self-adhered side laps are protected with a release film which is removed at the time of application, exposing the aggressive self-adhered SBS compound which provides immediate watertight seams.
The proprietary SBS top compound offers quality waterproofing and weathering physical properties while the polyester fleece bottom surface allows application to multiple substrates using Polyglass low rise foam adhesive. Modifleece is ideally suited for application directly over irregular or semi-rough surfaces such as Lightweight Insulating Concrete (LWIC) and re-cover over existing Modified Bitumen roofing systems and in areas where superior wind uplift resistance is required. Modifleece is applied using Polyglass low rise foam adhesive in a spatter pattern while the top film surface offers application of a variety of Polyglass self-adhered or torched membranes.
Typical Applications
• Use as a base ply adhered to LWIC (Lightweight Insulating Concrete)
• Use as a base ply adhered to existing APP/SBS modified bitumen roofing system
• Over other approved substrates
Features and Benefits
• Versatile: over semi-rough/irregular substrates; under torch or self-adhered APP/SBS cap sheets
• Tough polyester reinforced bottom surface fabric provides strong foam adhesive bond for higher wind uplift resistance
• Provides a strong and durable waterproofing substrate for other roofing membrane plies
• Quick dry-in adhered non-penetrating system: no fasteners needed
• Extend life of existing roof systems and avoid costly tear-offs – increase warranty coverage
• Easy to install self-adhered side laps with immediate watertight seal
Polyanchor SU is a lightweight, nailable synthetic roof underlayment designed to protect the roof deck. Polyanchor SU is stronger than traditional felts for improved wind resistance, durability through heavy foot traffic and adverse weather conditions.
Polyanchor SU’s non-woven fiber surface top surface and polymeric coated bottom surface provides enhanced walkability.
Polyanchor SU is ideally suited for asphalt shingles, synthetic shingles, and cedar shake roof covering systems. Polyanchor SU is preferably matched with Polystick IR-Xe installed on the eaves and valleys for ice and water protection.
Typical Applications
• Water-resistant barrier on steep slope roofing under asphalt shingles, synthetic shingles,
and cedar shakes roof coverings
• Nailable steep slope underlayment over approved wood decks for temporary
waterproofing protection
• Used in conjunction with Polystick IR-Xe self-adhered shingle underlayment for greater ice
and water protection at eaves and valleys
Features and Benefits
• Improved tear strength and wind uplift resistance compared to felts
• Enhanced deck grip and walkability
• 90-day UV resistance
• Lightweight, 10 square roll provides quick roof coverage
Polystick MX is a self-adhered high-temp waterproofing underlayment for metal roof coverings and various other applications. Utilizing ADESO® dual-compound self-adhered technology, Polystick MX features a polymer modified bitumen upper compound and a proprietary self-adhesive SBS (elastomeric) compound on the bottom. A split release film that protects the self-adhesive compound allows for easy application.
Polystick MX features a cavitated slip-resistant top film surface which can be exposed up to 90 days. With a temperature resistance of up to 250°F, Polystick MX is ideally suited for high-temperature roof covering systems such as steel and aluminum panels.
Typical Applications
• Specifically designed as underlayment for high-temperature applications under metal
• Suitable for application under asphalt shingles and other approved roof coverings
• Over entire roof and/or for valleys, skylights and other critical areas
Features and Benefits
• ADESO dual-compound self-adhered technology
• Cavitated slip-resistant film surface with up to 90 days exposure
• Fiberglass reinforced for added strength and dimensional stability.
• Self-adhered technology increases labor efficiency and roof dry-in speed
• Asphaltic compound provides excellent sealability around nails
• Approved up to 250°F
Polyanchor HV is a nailable anchor sheet specially designed for the temporary protection of steep-slope roofs in areas prone to high winds. Designed with Duofix™ Technology, Polyanchor HV uses a strong bituminous bonding surface combined with a special tear resistant fiberglass mat to provide superior wind uplift resistance. The top surface of Polyanchor HV is formulated to provide an ideal bonding surface for Polystick polymer modified self-adhered underlayments. The bituminous compounds in the sheet enhances sealability around fasteners and moisture protection while the heavy-duty mat provides strength and tear resistance around fasteners and plates. Polyanchor HV is ideally suited for use with clay/concrete tile roof covering systems with Polystick TU Plus or TU Max as the final substrate for the roof covering. Polyanchor HV is also suitable for use under asphalt shingles.
Typical Applications
• Nailable anchor sheet over approved steep-slope wood decks for temporary
waterproofing protection
• Base sheet for Polystick tile underlayments for concrete, clay, and slate tiles roof
covering systems
• Water-resistant barrier on steep slope roofing under asphalt shingles and shakes
Features and Benefits
• Duofix™ Technology provides superior wind uplift resistance.
• Top surface specially designed to provide highly bondable surface for Polystick
underlayments
• Surface engineered for walkability on sloped roofs
• High tensile-tear strength mat provides increased fastener and plate tear through resistance
• Nail sealing modified asphalt compound
Polyglass PMMA High Traffic Textured (HTT) Surface Finish is a high performance, rapid-curing, flexible, methacrylate resin with a pre-mixed aggregate, designed for pedestrian and/or vehicular traffic. It can be applied as a non-reinforced liquid applied surfacing material or as the trafficable surface coat over a reinforced PMMA Waterproofing System.