Polystick MX is a self-adhered high-temp waterproofing underlayment for metal roof coverings and various other applications. Utilizing ADESO® dual-compound self-adhered technology, Polystick MX features a polymer modified bitumen upper compound and a proprietary self-adhesive SBS (elastomeric) compound on the bottom. A split release film that protects the self-adhesive compound allows for easy application.
Polystick MX features a cavitated slip-resistant top film surface which can be exposed up to 90 days. With a temperature resistance of up to 250°F, Polystick MX is ideally suited for high-temperature roof covering systems such as steel and aluminum panels.
Typical Applications
• Specifically designed as underlayment for high-temperature applications under metal
• Suitable for application under asphalt shingles and other approved roof coverings
• Over entire roof and/or for valleys, skylights and other critical areas
Features and Benefits
• ADESO dual-compound self-adhered technology
• Cavitated slip-resistant film surface with up to 90 days exposure
• Fiberglass reinforced for added strength and dimensional stability.
• Self-adhered technology increases labor efficiency and roof dry-in speed
• Asphaltic compound provides excellent sealability around nails
• Approved up to 250°F
PolyBrite 71 is a quality grade, water-based elastomeric base coat. This formulation uses 100% acrylic resins cures to form a seamless fluid applied roof membrane. As a base coat, it provides excellent bleed through resistance.
PolyBrite 71 provides protection from UV and other weather exposures.
PolyBrite 35 CA is a tough, superior quality water-based elastomeric coating. This proprietary formulation uses a high-tensile strength 100% acrylic resin that cures to form a seamless fluid applied armor over approved roofing substrates. PolyBrite 35 CA can be applied as either a base or top surface coating. This product has excellent adhesion to sprayed polyurethane foam (SPUF) and a variety of other construction and roofing substrates and exceeds the tensile strength of typical acrylic roof coatings.
Specially formulated to provide superior durability and dirt pickup resistance.
PolyBrite 35 CA protects against damaging ultraviolet rays, due to its high reflectance properties, keeping the roof surface cool in high temperatures that result in reduced building energy costs. PolyBrite 35 CA exceeds the minimum requirements of ASTM D6083 Type I and II forming a highly durable protective layer extending the life of the roofing system assembly.
Polyflex 5.0 membranes are premium, polyester reinforced APP (plastomeric) modified bitumen roofing products specially designed for heat-welded applications. Constructed with a premium APP (plastomeric) compound, and incorporating superior non-woven polyester reinforcing, Polyflex 5.0 provides an exceptionally robust and durable roofing product which is easy to install and will provide long-term weathering performance that resists natural forces and other factors on the rooftop.
The top is constructed with a smooth sand surface while the bottom has a factory applied burn-off film.
Successive system layers can be heat welded with an additional ply of Polyflex 5.0 or Polyflex G cap sheets.
Polyfresko G SBS SA FR is a self-adhered Styrene-Butadiene-Styrene (SBS) granulated cap sheet with fire retardant additives for use in low-slope roofing. Polyfresko G SBS SA FR is manufactured using Polyglass’ patented ADESO® Dual-Compound Self-Adhered Technology. With this technology, a “true” elastomeric compound is applied to the top of the membrane and an aggressive, proprietary, self-adhesive compound is applied to the bottom. Polyfresko G SBS SA FR is constructed with a superior non-woven polyester reinforcement that provides flexibility and dimensional stability as well as excellent tear and puncture resistance.
Featuring patented CURE Technology®, Polyfresko G SBS SA FR has a highly reflective granule surface which meets, or exceeds most standards for cool roofing. CURE Technology features an innovative thin film technology attributing to exceptional granule retention, minimal staining, scuff resistance and UV stabilization for long-term durability and performance.
Polyfresko G SBS SA FR also features SEALLap® ULTRA, a granule-free side lap with self-adhesive compound and FASTLap®, granule free end lap. Each of these patented features provide for greater ease of application as well as improved long-term performance.
Polyfresko G SBS SA FR can be used as part of a Polyglass warranted multi-ply system, when combined with Elastoflex SA V Plus or other approved Polyglass base sheets.
Polyfresko G SBS SA is a self-adhered Styrene-Butadiene-Styrene (SBS) granulated cap sheet for use in low-slope roofing. Polyfresko G SBS SA is manufactured using Polyglass’ patented ADESO® Dual-Compound Self-Adhered Technology. With this technology, a “true” elastomeric compound is applied to the top of the membrane and an aggressive self-adhesive compound is applied to the bottom. Polyfresko G SBS SA is constructed with a superior non-woven polyester reinforcement that provides flexibility and dimensional stability as well as excellent tear and puncture resistance.
Featuring patented CURE Technology®, Polyfresko G SBS SA has a highly reflective granule surface which meets, or exceeds most standards for cool roofing. CURE Technology features an innovative thin film technology attributing to exceptional granule retention, minimal staining, scuff resistance and UV stabilization for long-term durability and performance.
Polyfresko G SBS SA also features SEALLap® ULTRA, a granule-free side lap with self-adhesive compound and FASTLap®, granule free end lap. Each of these patented features provide for greater ease of application as well as improved long-term performance.
Polyfresko G SBS SA can be used as part of a Polyglass warranted multi-ply system, when combined with Elastoflex SA V Plus or other approved Polyglass base sheets.