Polyglass® HRA is a 100% solids, asphalt-based, fluid-applied waterproofing solution designed to create a seamless, fully adhered barrier, eliminating the vulnerabilities of seams and joints that can lead to water intrusion. Polyglass HRA can be utilized in plaza decks, green roofs, tunnels and below grade wall applications, offering superior protection in environments that demand long- term durability and moisture resistance.
Features and Benefits
- Seamless waterproofing: forms a continuous, fully adhered membrane
- Remains flexible at low temperatures
- Fully bonds to substrate reducing risk of water intrusion
- Flexible composition allows for superior crack bridging
- Can be installed as low as 0°F (-18°C)
- Time-tested technology with a long-standing track record in demanding waterproofing conditions
- Suitable for various surfaces including concrete, gypsum, and wood
- Meets CGSB 37.50-M89 specifications for asphalt-based roofing and waterproofing
PG SFA – solvent free adhesive, is a proprietary hybrid polymer adhesive specifically engineered to serve as a cold-applied bonding agent. A single component, moisture cure adhesive, it is designed for secure attachment of SBS (Styrene-Butadiene-Styrene) modified bitumen base sheets as well as SBS modified bitumen cap sheets, whether smooth or granulated, ensuring strong adhesion without the need for heat or open flames. As part of the PG adhesive product line, it is specifically tailored for markets and regions where strict environmental regulations are in place, focusing on minimizing VOC emissions to comply with building codes.
Features and Benefits
- Low odor
- Flexible with cohesive properties
- Eliminates the need for kettles and torches
- Excellent weatherability (Not intended for permanent exposure)
- Non-destructive to asphalt based roofing membranes
- Solvent and Isocyanate free
- Paintable
- Non-flammable
PG 350 LV is a low-VOC (Volatile Organic Compound) adhesive specifically engineered to serve as a cold-applied bonding agent. It is designed for secure attachment of SBS (StyreneButadiene-Styrene) modified bitumen base sheets as well as SBS modified bitumen cap sheets, whether smooth or granulated, ensuring strong adhesion without the need for heat or open flames. As part of the PG adhesive product line, PG 350 LV is designed for markets that emphasize sustainability and lower environmental impact.
Features and Benefits
- Adheres to substrate and superior lap shear adhesion.
- Flexible with cohesive properties.
- Eliminates the need for kettles and torches.
- Excellent 24 hour strength; fully cured after 30 days.
- Non-destructive to asphalt based roofing membranes.
- Low odor and asbestos free.
Engineered for durability and integrity under mechanical stress, it offers exceptional chemical resistance and elasticity, even in extreme conditions. Its seamless and fully bonded, creating a monolithic membrane ideal for a variety of surfaces and industries.
Features and Benefits
- 80 mils
- Dry time 3 hours
- Easy to repair
- Low VOCs
- System application 40°F and rising
- Pot life: 20–25 minutes
- Coverage @ 80 mils WFT 20 ft2/gallon (62 ft2/kit)
- Adheres to a wide variety of substrates
- Can be used in exposed applications with top coat
- Roller or Squeegee applied
PG 800W is an asphalt-based, clay emulsion product that can be used as a protective roof coating. It can be used over smooth surfaced asphalt built-up, modified bitumen membranes. Also, for use as a base coat for reflective elastomeric coatings. PG 800W can be used as a surface protectant or waterproofing when used in conjunction with polyester reinforcement.
When applied as a roof protectant PG 800W’s unique formulation allows the film to “breathe” while drying and is waterproof upon curing.
PolyBrite 90.2 is a premium grade high solid, moisture cure, liquid applied silicone coating available in White or Kool Grey, which cures to form a seamless membrane when applied over the entire roof area. It also keeps the surface cool, providing protection from ultraviolet sun and other weather exposures.