Polyanchor HV is a nailable anchor sheet specially designed for the temporary protection of steep-slope roofs in areas prone to high winds. Designed with Duofix™ Technology, Polyanchor HV uses a strong bituminous bonding surface combined with a special tear resistant fiberglass mat to provide superior wind uplift resistance. The top surface of Polyanchor HV is formulated to provide an ideal bonding surface for Polystick polymer modified self-adhered underlayments. The bituminous compounds in the sheet enhances sealability around fasteners and moisture protection while the heavy-duty mat provides strength and tear resistance around fasteners and plates. Polyanchor HV is ideally suited for use with clay/concrete tile roof covering systems with Polystick TU Plus or TU Max as the final substrate for the roof covering. Polyanchor HV is also suitable for use under asphalt shingles.
Typical Applications
• Nailable anchor sheet over approved steep-slope wood decks for temporary
waterproofing protection
• Base sheet for Polystick tile underlayments for concrete, clay, and slate tiles roof
covering systems
• Water-resistant barrier on steep slope roofing under asphalt shingles and shakes
Features and Benefits
• Duofix™ Technology provides superior wind uplift resistance.
• Top surface specially designed to provide highly bondable surface for Polystick
underlayments
• Surface engineered for walkability on sloped roofs
• High tensile-tear strength mat provides increased fastener and plate tear through resistance
• Nail sealing modified asphalt compound
Polyvap SA G is a self-adhered vapor retarder for use in commercial low-slope roofing applications. Utilizing ADESO® dual-compound self-adhered technology, Polyvap SA G features a polymer modified bitumen upper compound and a proprietary self-adhesive SBS (elastomeric) compound on the bottom. A split release film that protects the self-adhesive compound allows for easy application.
Polyvap SA G is reinforced with a fiberglass mat, and surfaced with aggregate to enhance skid resistance and allow exposure up to 90 days. The rubberized asphalt seals around correctly installed nails on the weathering surface.
Polyfresko G SBS HP FR is a premium Styrene-Butadiene-Styrene (SBS) granulated cap sheet with fire retardant additives for use in low-slope roofing. Polyfresko G SBS HP FR is constructed with a high performance non-woven polyester reinforcement that provides flexibility and dimensional stability as well as excellent tear and puncture resistance. Polyfresko G SBS HP FR has a film bottom surface for heat welding application.
Featuring patented CURE Technology®, Polyfresko G SBS HP FR has a highly reflective granule surface which meets, or exceeds most standards for cool roofing. CURE Technology features an innovative thin film technology attributing to exceptional granule retention, minimal staining, scuff resistance and UV stabilization for long-term durability and performance.
Polyfresko G SBS HP FR can be used as part of a Polyglass warranted multi-ply system, when combined with Elastoflex S6 or other approved Polyglass base sheets.
Polyflex 5.0 membranes are premium, polyester reinforced APP (plastomeric) modified bitumen roofing products specially designed for heat-welded applications. Constructed with a premium APP (plastomeric) compound, and incorporating superior non-woven polyester reinforcing, Polyflex 5.0 provides an exceptionally robust and durable roofing product which is easy to install and will provide long-term weathering performance that resists natural forces and other factors on the rooftop.
The top is constructed with a smooth sand surface while the bottom has a factory applied burn-off film.
Successive system layers can be heat welded with an additional ply of Polyflex 5.0 or Polyflex G cap sheets.
Elastoflex V HP is an SBS (elastomeric) modified bitumen roofing membrane base sheet. This durable membrane is reinforced with a high performance fiberglass mat to ensure exceptional strength and dimensional stability to the product. The proprietary SBS compound offers superior waterproofing and weathering physical properties.
Elastoflex V HP is intended for use as a base ply or interply membrane and designed to be installed in mechanically attached or heat-welded. Elastoflex V HP can be used as a part of a Polyglass multi-ply system, when combined with Elastoflex V G HP FR cap sheet or other approved Polyglass cap sheets.
Elastoflex SA Base membrane is a self-adhered, elastomeric base ply low-slope roofing product. Elastoflex SA Base is manufactured using patented ADESO® dual-compound self-adhered technology, whereby a “true” Styrene-Butadiene-Styrene (SBS) modified asphalt compound is applied on the top layer and a proprietary self-adhesive SBS compound is applied to the bottom. Elastoflex SA Base membrane is built with a strong non-woven polyester mat to enhance tear strength and puncture resistance, providing a robust membrane that resists natural forces and other factors on the rooftop.
Elastoflex SA Base membrane is finished with a film with pre-printed laylines on the top surface and a split release film on the bottom surface.
Elastoflex SA Base can be used as part of a Polyglass warranted multi-ply system with Elastoflex SA P or other approved Polyglass cap sheet to provide cleaner application, improved application speed and removes the need for torches, hot asphalt or bonding adhesives on the job site.