PG 800W is an asphalt-based, clay emulsion product that can be used as a protective roof coating. It can be used over smooth surfaced asphalt built-up, modified bitumen membranes. Also, for use as a base coat for reflective elastomeric coatings. PG 800W can be used as a surface protectant or waterproofing when used in conjunction with polyester reinforcement.
When applied as a roof protectant PG 800W’s unique formulation allows the film to “breathe” while drying and is waterproof upon curing.
PolyBrite 71 is a quality grade, water-based elastomeric base coat. This formulation uses 100% acrylic resins cures to form a seamless fluid applied roof membrane. As a base coat, it provides excellent bleed through resistance.
PolyBrite 71 provides protection from UV and other weather exposures.
PolyBrite 90.2 is a premium grade high solid, moisture cure, liquid applied silicone coating available in White or Kool Grey, which cures to form a seamless membrane when applied over the entire roof area. It also keeps the surface cool, providing protection from ultraviolet sun and other weather exposures.
PolyBrite 35 CA is a tough, superior quality water-based elastomeric coating. This proprietary formulation uses a high-tensile strength 100% acrylic resin that cures to form a seamless fluid applied armor over approved roofing substrates. PolyBrite 35 CA can be applied as either a base or top surface coating. This product has excellent adhesion to sprayed polyurethane foam (SPUF) and a variety of other construction and roofing substrates and exceeds the tensile strength of typical acrylic roof coatings.
Specially formulated to provide superior durability and dirt pickup resistance.
PolyBrite 35 CA protects against damaging ultraviolet rays, due to its high reflectance properties, keeping the roof surface cool in high temperatures that result in reduced building energy costs. PolyBrite 35 CA exceeds the minimum requirements of ASTM D6083 Type I and II forming a highly durable protective layer extending the life of the roofing system assembly.
PolyBrite 33 CS is a water-based 100% Acrylic elastomeric coating that cures to form a seamless shield when applied over approved roofing substrates. PolyBrite 33 CS has excellent high and low temperature dry film flexibility for performance in a variety of climate conditions. Due to its high reflectance properties PolyBrite 33 CS protects against damaging ultraviolet rays, keeping the roof surface cool in high temperatures, resulting in reduced building energy costs.
Specially formulated to exhibit superior wet hide during installation and dry hide once cured. Exceptional product flow and leveling characteristics results in ease of application. PolyBrite 33 CS exceeds the minimum requirements of ASTM D6083 Type I and II forming a durable protective layer extending the life of the roofing system assembly.
PolyBrite 31 CB is a water-based Styrene Acrylic elastomeric coating that cures to form a seamless reflective barrier when applied over approved roofing substrates. PolyBrite 31 CB is specifically formulated for hot dry climates and extends the life cycle of new and existing roof systems by providing protection from ultraviolet sun and other weather conditions. Its highly reflective properties keep the roof surface cool resulting in reduced building energy cost in high temperate conditions.
PolyBrite 31 CB exhibits wet hide during installation and dry hide once cured. The product’s flexibility allows it to expand and contract to accommodate normal roof movement, therefore avoiding surface damage. Exceptional product flow and leveling characteristics results in ease of application.