Certified Construction opted to re-roof the 250,000 square foot airport with Polyglass’ Elastoflex® SA V and SA P three-ply, built-up roof system. Elastoflex SA V and SA P are premium self-adhesive roofing membranes with ADESO® technology.
The membranes provide a simple, safe and economical roof installation without compromising structural integrity and lap sealing capabilities. Eliminating the need for torching and mopping, Elastoflex membranes provide strength, weathering resistance and waterproofing performance.
Download Project PDF
The large home situated on its own private island was designed with luxury in mind. When it was time to consider roofing options, quality products were a priority. Under the beautiful copper and metal roofs, Polystick MTS was installed due to its incredible performance for high temperature applications.
The areas that required roofing material for low slope applications were covered with Elastoflex SA V base sheet and capped with Polyflex SA P in Red Blend to complement the metal and copper roofs.
Download Project PDF
One of the most valuable qualities of Polyglass’ Polystick TU Plus self-adhesive membranes is that they can be exposed to the elements for up to 180 days without damage to the membrane or the substructure. That time frame gives roofers the opportunity to install the membrane on all buildings and then go back, sometimes months later, to install the roof tiles. Using the membrane gives flexibility with construction schedules and unpredictable weather.
Download Project PDF
Perched at the top of a steep hill that experiences significant wind gusts, the main sanctuary features a roof with a 3:12 pitch. Finished with clay roof tiles, the contractor chose to install a three ply, self-adhered Polyglass system underneath the clay roof tiles to ensure maximum protection against the elements. The roof pitch and propensity for high winds didn’t allow for the tile roof to have any roof penetrations. The Polyglass system provided the waterproofing protection found when using multi-ply systems, in addition to a surface to which the tiles could be foam adhered.
Download Project PDF
Five of the seven floors of this impressive building were reroofed with a Polyglass Self-Adhered roof system that included Polytherm® polyiso insulation, two layers of Elastoflex® SA V base and one layer of Polyflex® SA P cap sheet in Buff. Roofing a total of over 230,000 square feet, Western Roofing completed the job without interruption to building occupants and in record time.
Download Project PDF
The existing modified roof was cleaned and primed before installing Polyflex smooth cap sheet over the 30,000 square foot portion of the roof that was being reroofed. Polyflex was heat-welded and left to weather for 30 days. Once ready, Polybrite 70 elastomeric roof coating was applied to achieve a monolithic, white, reflective surface.
Download Project PDF