Elastoflex SA P is a self-adhered Styrene-Butadiene-Styrene (SBS) granulated cap sheet for use in low-slope roofing. Elastoflex SA P is manufactured using Polyglass’ patented ADESO® Dual-Compound Self-Adhered Technology. With this technology, a “true” elastomeric modified asphalt compound is applied to the top of the membrane and a proprietary self-adhesive SBS compound is applied to the bottom. Elastoflex SA P is constructed with a tough non-woven polyester reinforcement that provides flexibility and dimensional stability as well as excellent tear and puncture resistance.
The top surface of Elastoflex SA P has a granular finish with mulitple color options. Elastoflex SA P also features SEALLap® ULTRA, a granule-free side lap with self-adhesive compound and FASTLap®, granule free end lap. Each of these patented features provide for greater ease of applications as well as improved long-term performance.
Elastoflex SA P can be used as part of a Polyglass warranted multi-ply system with Elastoflex SA V, Elastoflex SA V Plus, or other top film-surfaced Polyglass base sheets to provide a cleaner application, improved application speed and removes the need for torches, hot asphalt or bonding adhesives on the job site.
PolyBrite 71-HS is a high solids, premium grade water-based elastomeric coating. This proprietary formulation using 100% acrylic resins cures to form a seamless fluid applied roof membrane. PolyBrite 71-HS offers the unique ability to extend the life of a roofing system, lower overall life cycle costs and provide excellent bleed through resistance. When applied in white, PolyBrite 71-HS is highly reflective keeping the roof surface cool and providing protection from UV and other weather exposures.
PolyBrite 75 is a high tensile, superior grade water-based elastomeric coating. This proprietary formulation using 100% acrylic resins cures to form a seamless liquid applied roof membrane. PolyBrite 75 can be used as either a base or surface coat. This product has excellent adhesion to sprayed polyurethane foam (SPUF) and a variety of other construction and roofing substrates, and can exceed the expected tensile strength of typical acrylic roof coatings. This product provides excellent durability and dirt pickup resistance.
PG 700 is a high quality water-based elastomeric coating available in white or as tinted, which cures to form a seamless membrane when applied over the entire roof area. In addition to keeping the surface cool, PG 700 extends the life cycle of new and existing roof systems, providing protection from ultraviolet sun and other weather exposures.
Elastobase V is a high quality Styrene-Butadiene-Styrene (SBS) modified bitumen roofing membrane reinforced with a high quality fiberglass mat which provides strength and excellent dimensional stability. The proprietary SBS compound offers quality waterproofing and weathering physical properties. Elastobase V is designed for use as a base ply layer in multi-layer low-slope assemblies.
The top and bottom surfaces are available in sand or factory applied burn-off film.
Elastobase V is intended for use as a base ply or interply membrane and designed to be installed in mechanically attached, hot asphalt, heat-welded, or as part of cold-applied system. When the top of membrane is surfaced with film, Elastobase V can be used as a base sheet in self-adhered systems.
Elastoflex SA V membrane is a premium, self-adhered elastomeric base ply roofing product, manufactured using patented ADESO® Dual-Compound Self-Adhered Technology, whereby a “true” Styrene-Butadiene-Styrene (SBS) modified asphalt compound is applied on the top layer and an aggressive self-adhesive compound is applied on the bottom layer. Elastoflex SA V membrane is built with a high performance reinforced fiberglass mat to ensure excellent dimensional stability.
Elastoflex SA V membrane is finished with sand or polyolefin film with laylines on the top surface and a split release film on the bottom surface.