PolyBrite 31 CB is a water-based Styrene Acrylic elastomeric coating that cures to form a seamless reflective barrier when applied over approved roofing substrates. PolyBrite 31 CB is specifically formulated for hot dry climates and extends the life cycle of new and existing roof systems by providing protection from ultraviolet sun and other weather conditions. Its highly reflective properties keep the roof surface cool resulting in reduced building energy cost in high temperate conditions.
PolyBrite 31 CB exhibits wet hide during installation and dry hide once cured. The product’s flexibility allows it to expand and contract to accommodate normal roof movement, therefore avoiding surface damage. Exceptional product flow and leveling characteristics results in ease of application.
PolyBrite 55 is an Elastomeric Roof Coating specially developed for application over new Sprayed Polyurethane Foam (SPF) roof systems. Formulated for superior adhesion over foam. Employs a highly flexible acrylic polymer for enhanced thermal expansion and contraction capabilities typical of roofing foam surfaces.
SINGLE-COMPONENT, FAST-CURING, MONOLITHIC WATERPROOFING MEMBRANE THAT CAN BE APPLIED TO DAMP AND GREEN CONCRETE
Mapeseal GC is a fast-curing, 100%-solids, cold-fluid-applied, single-component, moisture-curing, structural waterproofing membrane that will not shrink and is VOC compliant in virtually all municipalities. Very low in odor, it is well suited for use in and around occupied spaces. Thanks to advanced proprietary technology, this single grade membrane can be used on both vertical and horizontal surfaces, as well as, for green concrete applications.
For critical applications, the system can be reinforced with Mapeseal Fabric. Mapeseal GC can be applied by roller, brush, trowel, or squeegee.
Features and Benefits
- Single-grade membrane for vertical and horizontal applications
- Suitable for green concrete
- Can be applied in a variety of thicknesses, or with reinforcement, making it customizable to any job
- Seamless and monolithic
- Does not require a primer
- Applies easily with no mixing or special equipment required
- Free of solvents
- Very low odor
- Free of tar and asphalt
- Compatible with common construction materials such as concrete, concrete masonry units (CMUs), stone, metal, plastic (PVC and ABS), exterior grade plywood and insulating concrete forms (ICF)
LOW-VOC, SOLVENT BASED ADHESIVE PRIMER FOR MAPETHENE LT60 / HT60
This quick-drying, high-tack adhesive primer is specifically formulated to promote maximum adhesion when using Polyglass waterproofing membranes.
Features and Benefits
- Quick-drying
- The low content of volatile organic compounds (VOCs) is less than 250 g per L and is compliant with most state and local VOC requirements for adhesives and sealants. Note: Be sure to check all applicable regulations, based on the project location.
- Aggressive tack improves the adhesion of membranes to many substrates.
- Ready to use; no mixing or dilution required
- For vertical and horizontal applications
- Wide temperature application window, down to 25°F (-4°C)
WATER-BASED ADHESIVE PRIMER FOR MAPETHENE LT60/HT60
This quick-drying, water-based, high-tack adhesive primer is specifically formulated to promote maximum adhesion when using Polyglass waterproofing membranes.
Features and Benefits
- Low VOC, low odor formulation
- Quick-drying
- Aggressive tack improves the adhesion of membranes to many substrates.
- Ready to use; no mixing or dilution required
- Water-based and nonflammable
- Suitable for vertical and horizontal applications
- For attaching Mapedrain™ drainage composites to Mapethene™ and Mapeseal™ GC
PolyBrite 95.1 is a ready-to-use, solvent borne, moisture cure silicone roof coating available in white or as tinted, which cures to form a seamless membrane when applied over the entire roof area. It also keeps the surface cool, providing protection from ultraviolet sun and other weather exposures.