PG SFA Flashing is higher viscosity version of our solvent-free adhesive for modified bitumen systems. It is specifically engineered to be used with Polyglass SBS membranes.
Polyglass Primer EP-1020 is a two-component, 100% solids epoxy resin designed to promote adhesion between metal substrates and Tecnocoat membrane systems.
Polyglass Primer EP-1010 is a two-component epoxy primer designed to enhance adhesion between substrate and Tecnocoat membrane systems.
Polyglass PMMA Mortar is a trowel applied resin-mortar used as a thick coating system for interior and exterior un-reinforced waterproofing and surfacing systems. Polyglass PMMA Mortar is also used as a traffic surfacing applied over Polyglass PMMA reinforced waterproofing membranes.
Features and benefits:
• Easy to use.
• Flexible – will expand and contract with movement of surfaces.
• Versatile – suitable for most surfaces.
Vertiwrap NPL and NPL LT air barrier membranes prevent the passage of air, water vapor, and liquid water from entering the wall assembly. Vertiwrap NPL and NPL LT reduces the build up of moisture in the wall assembly, increasing the wall durability and comfort of the
building occupants. Vertiwrap NPL and NPL LT is compliant in a wide variety of NFPA285 wall assemblies.
SINGLE-COMPONENT, FAST-CURING, MONOLITHIC WATERPROOFING MEMBRANE THAT CAN BE APPLIED TO DAMP AND GREEN CONCRETE
Mapeseal GC is a fast-curing, 100%-solids, cold-fluid-applied, single-component, moisture-curing, structural waterproofing membrane that will not shrink and is VOC compliant in virtually all municipalities. Very low in odor, it is well suited for use in and around occupied spaces. Thanks to advanced proprietary technology, this single grade membrane can be used on both vertical and horizontal surfaces, as well as, for green concrete applications.
For critical applications, the system can be reinforced with Mapeseal Fabric. Mapeseal GC can be applied by roller, brush, trowel, or squeegee.
Features and Benefits