Polystrip™ SA

Applicable Standards
Application Methods
Self-Adhered

Polyglass Polystrip SA is a self-adhering waterproofing tape composed of a slip resistant surface and UV resistant film laminated to an aggressive elastomeric (SBS) modified asphalt adhesive. The adhesive is protected by a siliconized release paper which allows quick and accurate installation.

Polystrip SA seals the roof deck seams and other construction details in compliance with project and/or building code requirements where a self-adhesive strip meeting ASTM D1970 standards is designated.

Polystrip SA may be covered with any Polystick or Polyanchor roofing underlayment or roofing felt. Polystrip SA can also be used as a general flashing membrane.

Typical Applications

  • Designed for applications on new or re-roof projects over roof deck joints
  • May be covered with Polyglass Polystick or Polyanchor underlayments
  • Can also be used as a general flashing membrane
  • Adhesion to plywood, OSB, metal and other approved substrates

Features and Benefits

  • “Seal the deck” joints from water intrusion.
  • Slip resistant walking surface.
  • Highly flexible and lay flat characteristics; transitions over uneven joints.
  • Asphaltic rubberized compound provides excellent sealability around nails.
  • Approved up to 250°F
  • Up to 60 days UV exposure.

Polystrip SA – Roof Deck Joint Tape Take-Off Calculator

Designed to help roofing professionals estimate how many rolls of Polystrip SA joint tape are needed based on the square footage of a roof. Estimates are based on standard measurements for plywood and joint spacing to calculate the total linear footage of deck joints and provide an accurate roll count.

Product Packaging & Dimensions – Polystrip SA
Roll Width Length Rolls x box Coverage x box
4″ Wide 4″ (10.2 cm) 67′ (20.4 m) 12 804′ (245 m)
6″ Wide 6″ (15.2 cm) 67′ (20.4 m) 8 536′ (163 m)

Related Documents